Tyler Edwards - Layed out and drilled hammer head. And thoroughly cleaned the mill and floor around the mill.
Today I sanded and cleaned my hammer to prep it for painting. Andrew Belyea
today, i sanded my hammer and then i helped clean up!:)
Today I finished marking my hammerhead and drilled it. I also threaded the inside of the hammerhead.-TJ Shelton
Aaron chandler: i put the 45 degree on my hammer handle and swept the tables.
i got done with most of it just have to attach the head to the handle-Zach Ball
today i finished my hammer And helped dillian on his!!!!!!_GAVIN-CHANDLER_
Stephen Smith - I helped other people catch up with their hammer parts, and cleaned up the lathe and mill.
lies
Tyler Barry - I finished the top part of my hammer and cleaned up the shop
Today I finished facing my hammer handle, then i started taking the diameter down on the handle
this is jesse ledford if you wanna know
gavin crandall-today i almost finished my hammer handle today
Jacob Hutchins- today i helped people finish their part
Evan Malonetoday i worked on my hammer handle and got the dimater turned down and almost finshed the hammer head
I put my part in the baker and we spraid paint on it and i will get it back tommrow.-Colby Wyatt
Today I finished making my guitar slide.-TJ Shelton
Tyler Edwards - Layed out and drilled hammer head. And thoroughly cleaned the mill and floor around the mill.
ReplyDeleteToday I sanded and cleaned my hammer to prep it for painting. Andrew Belyea
ReplyDeletetoday, i sanded my hammer and then i helped clean up!:)
ReplyDeleteToday I finished marking my hammerhead and drilled it. I also threaded the inside of the hammerhead.
ReplyDelete-TJ Shelton
Aaron chandler: i put the 45 degree on my hammer handle and swept the tables.
ReplyDeletei got done with most of it just have to attach the head to the handle-Zach Ball
ReplyDeletetoday i finished my hammer And helped dillian on his!!!!!!
ReplyDelete_GAVIN-CHANDLER_
Stephen Smith - I helped other people catch up with their hammer parts, and cleaned up the lathe and mill.
ReplyDeletelies
DeleteTyler Barry - I finished the top part of my hammer and cleaned up the shop
ReplyDeleteToday I finished facing my hammer handle, then i started taking the diameter down on the handle
ReplyDeletethis is jesse ledford if you wanna know
Deletegavin crandall-today i almost finished my hammer handle today
ReplyDeleteJacob Hutchins- today i helped people finish their part
ReplyDeleteEvan Malone
ReplyDeletetoday i worked on my hammer handle and got the dimater turned down and almost finshed the hammer head
I put my part in the baker and we spraid paint on it and i will get it back tommrow.
ReplyDelete-Colby Wyatt
Today I finished making my guitar slide.
ReplyDelete-TJ Shelton