Tyler Edwards - I marked out my hammer head and learned how to power coat.
Stephen Smith - I marked out my hammer head for drilling, drilled the hole on the milling machine, and tapped the hole with a hand tap. I stayed after to clean the shop.
Aaron chandlert: I used the lathe today and learned how to use the milling machine.
i learned how to use the milling machine, but didnt gdet to use it!!!!!!!!!_GAVIN-CHANDLER_
gavin crandall 4th- i swept until there was open lathe then worked on my hammer handle some.
Tyler Barry - marked my part and faced my hammer handel
zach ball worked on my part and cleaned at the end of class
Tyler Edwards - I marked out my hammer head and learned how to power coat.
ReplyDeleteStephen Smith - I marked out my hammer head for drilling, drilled the hole on the milling machine, and tapped the hole with a hand tap. I stayed after to clean the shop.
ReplyDeleteAaron chandlert: I used the lathe today and learned how to use the milling machine.
ReplyDeletei learned how to use the milling machine, but didnt gdet to use it!!!!!!!!!
ReplyDelete_GAVIN-CHANDLER_
gavin crandall 4th- i swept until there was open lathe then worked on my hammer handle some.
ReplyDeleteTyler Barry - marked my part and faced my hammer handel
ReplyDeletezach ball worked on my part and cleaned at the end of class
ReplyDelete